imneedy
06-07 01:35 PM
In NJ this is how it has been for last few years.
wallpaper Ralph Macchio and Jamie Belman
STAmisha
08-13 08:58 PM
Can people convert LC pending in BEC to PERM? If So, how safe it is and how much time it takes totally.
ajju
04-10 12:45 PM
I have never been to florida.. This is what concerns me also why they sent the case to miami,fl local office.. I Checked with attorney also he said it is not going to effect the processing of case.
Then its possible.. depending from where GC was filed...
Call them and lets us know what you find out...
Then its possible.. depending from where GC was filed...
Call them and lets us know what you find out...
2011 that starred Ralph Macchio
ibb
10-15 09:18 AM
It's state law.
Why would anybody ask for visa to issue a driver's license? How is one's driving privilege dependent upon visa? No one has ever asked me or my wife or my friends for a visa to issue a driver's license. Is this some law specific to some states?
Why would anybody ask for visa to issue a driver's license? How is one's driving privilege dependent upon visa? No one has ever asked me or my wife or my friends for a visa to issue a driver's license. Is this some law specific to some states?
more...
LloydsApple
11-12 03:55 PM
Updates are coming in fast.
It turns out my wife is not yet elegible to get an ID card. She can get her license when I get my real copy of birth certificate and that will happen in about a week when it should come in by mail.
The problem is that she can get some sort of temporary paperwork but the official drivers license will take up to another 6 weeks to get.
Is there still no problem with traveling? I would guess not but again, as the story changes, helpful insight is very much welcome. Thanks!
It turns out my wife is not yet elegible to get an ID card. She can get her license when I get my real copy of birth certificate and that will happen in about a week when it should come in by mail.
The problem is that she can get some sort of temporary paperwork but the official drivers license will take up to another 6 weeks to get.
Is there still no problem with traveling? I would guess not but again, as the story changes, helpful insight is very much welcome. Thanks!
chanduv23
04-27 02:58 PM
you may not get much ifnormation from Infopass - you can go for infopass for issues like FP or Name check status or similar things.
Well Don't don't assume that "pre adjudicated" means everything with the case is over and the ONLY factor is visa number unavailability.
Pre adjudicated means - things are fine as of now.
Well Don't don't assume that "pre adjudicated" means everything with the case is over and the ONLY factor is visa number unavailability.
Pre adjudicated means - things are fine as of now.
more...
ryan
05-28 07:57 PM
Thanks Ryan for reply but I am bit confused... Do I need to have US Visa for working with Canadian company, even if company don't have anything do with US.
It's canada based company and will be working remotely.
Let me get this straight; You're working "remotely" for a Canadian firm whilst living (full time) in the United States?
You shall require a US work visa or a legal resident status to live & work in the US - because (like I said) your status in Canada is irrelevant whilst living & working full time in the US (for a US or foreign Company) I'm not quite sure why that's confusing?
It's canada based company and will be working remotely.
Let me get this straight; You're working "remotely" for a Canadian firm whilst living (full time) in the United States?
You shall require a US work visa or a legal resident status to live & work in the US - because (like I said) your status in Canada is irrelevant whilst living & working full time in the US (for a US or foreign Company) I'm not quite sure why that's confusing?
2010 Ralph Macchio - DWTS After
santb1975
05-17 11:00 PM
Thanks a lot
My $100..
Paypal ID #8BB01536AL566510N
Thanks
My $100..
Paypal ID #8BB01536AL566510N
Thanks
more...
natrajs
05-12 10:09 AM
At last, I received my approval on May 8th 2008. What a relief. I have learned a lot from this fourm. Thanks a lot guys.
Congrats and Best Wishes
Congrats and Best Wishes
hair ralph macchio-which doctor
corleone
11-09 10:48 AM
I did answer your question in my first post and asked you a question on which you replied:
There is a website called Google. Its amazing in that it is above nationality and responds to every "what is..."
I'm answering your question, and you are being sarcastic - what do you expect?
There is a website called Google. Its amazing in that it is above nationality and responds to every "what is..."
I'm answering your question, and you are being sarcastic - what do you expect?
more...
spec1968
10-26 09:55 AM
Thanks for the responses. I was told that i can get extension upon approval of 140 as PD is less than 365 days. So i am looking for alternatives to stay legal until approval of 140.
Seniors/Gurus help me out.
Thanks
Seniors/Gurus help me out.
Thanks
hot Ralph+macchio+and+wife
vaishnavilakshmi
07-07 05:23 PM
Hi all,
There are many applications which reached on 30th june and 1st july too!!!My application was mailed on 29th june and reached uscis (nebraska)on 30th june .Can u please upgrade the poll??
vaishu
There are many applications which reached on 30th june and 1st july too!!!My application was mailed on 29th june and reached uscis (nebraska)on 30th june .Can u please upgrade the poll??
vaishu
more...
house info-stars.com » Ralph Macchio
pragir
07-16 04:35 PM
Has anyone and their spouse both filed for 485s while listing each other as beneficiary as well?
Is this possible?
Is this possible?
tattoo Hi Ralph!
devamanohar
07-09 08:34 PM
My application reached at 11:34 am on July 2.
more...
pictures does ralph macchio Bejulia
sangmami
08-15 09:10 PM
hi,
where do we get to read the receipt number from the back of the check ?..i see so many ppl write that they cud get the receipt number from the back of the check and with that the cud track the fate of receipt notice.The back of my cleared check has so many numbers but they are all overlapping and unreadable.Do any1 else has the same issue?
can any1 tell what is the window period b ween check clearance and recipt notice?
Thanks.
where do we get to read the receipt number from the back of the check ?..i see so many ppl write that they cud get the receipt number from the back of the check and with that the cud track the fate of receipt notice.The back of my cleared check has so many numbers but they are all overlapping and unreadable.Do any1 else has the same issue?
can any1 tell what is the window period b ween check clearance and recipt notice?
Thanks.
dresses Ralph Macchio on Myspace
sledge_hammer
06-29 10:08 AM
^^^^
more...
makeup Ralph Macchio at Hollywood
buehler
07-14 09:48 AM
The EB numbers from 2006 also include the Schedule A workers and they were not constrained by the 7% limit. That is why India and Philippines were able to get more than 7%
girlfriend I LOVE U RALPH
regacct
04-26 08:04 AM
Try sending the complete info with all the supporting documents, and a letter mentioning that you are sending this in addition to the one that was filed electronically and this was to correct the omission present in the e-filed app.
hairstyles Ralph Macchio on Myspace
kirupa
08-20 06:25 PM
Cake - that is by design. Place the contents of your grid inside a ViewBox control (WPF only I believe). Once you have done that, you will see the contents of your grid scale as its height gets altered.
My earlier XAML snippet could be used when pasted between the <Window> tags. To try out what I just mentioned in this post, create a new WPF project called Animation and overwrite all of the XAML in Window1.xaml with the following:
<Window
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
x:Class="Animation.Window1"
x:Name="Window"
Title="Window1"
Width="640" Height="480">
<Window.Resources>
<Storyboard x:Key="Storyboard1">
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="grid" Storyboard.TargetProperty="(FrameworkElement.Height)">
<SplineDoubleKeyFrame KeyTime="00:00:00.5000000" Value="0"/>
</DoubleAnimationUsingKeyFrames>
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="grid1" Storyboard.TargetProperty="(UIElement.RenderTransform).(TransformGroup.Childr en)[0].(ScaleTransform.ScaleY)">
<SplineDoubleKeyFrame KeyTime="00:00:00.5000000" Value="2.93"/>
</DoubleAnimationUsingKeyFrames>
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="grid1" Storyboard.TargetProperty="(UIElement.RenderTransform).(TransformGroup.Childr en)[3].(TranslateTransform.Y)">
<SplineDoubleKeyFrame KeyTime="00:00:00.5000000" Value="96.5"/>
</DoubleAnimationUsingKeyFrames>
</Storyboard>
</Window.Resources>
<Window.Triggers>
<EventTrigger RoutedEvent="FrameworkElement.Loaded">
<BeginStoryboard Storyboard="{StaticResource Storyboard1}"/>
</EventTrigger>
</Window.Triggers>
<Grid x:Name="LayoutRoot">
<StackPanel>
<Grid Height="100" Background="#FFF5FF00" x:Name="grid">
<Viewbox HorizontalAlignment="Left" Width="100">
<Button Content="Button"/>
</Viewbox>
</Grid>
<Grid Height="100" Background="#FF00B3FF" RenderTransformOrigin="0.5,0.5" x:Name="grid1">
<Grid.RenderTransform>
<TransformGroup>
<ScaleTransform ScaleX="1" ScaleY="1"/>
<SkewTransform AngleX="0" AngleY="0"/>
<RotateTransform Angle="0"/>
<TranslateTransform X="0" Y="0"/>
</TransformGroup>
</Grid.RenderTransform>
</Grid>
</StackPanel>
</Grid>
</Window>
:)
My earlier XAML snippet could be used when pasted between the <Window> tags. To try out what I just mentioned in this post, create a new WPF project called Animation and overwrite all of the XAML in Window1.xaml with the following:
<Window
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
x:Class="Animation.Window1"
x:Name="Window"
Title="Window1"
Width="640" Height="480">
<Window.Resources>
<Storyboard x:Key="Storyboard1">
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="grid" Storyboard.TargetProperty="(FrameworkElement.Height)">
<SplineDoubleKeyFrame KeyTime="00:00:00.5000000" Value="0"/>
</DoubleAnimationUsingKeyFrames>
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="grid1" Storyboard.TargetProperty="(UIElement.RenderTransform).(TransformGroup.Childr en)[0].(ScaleTransform.ScaleY)">
<SplineDoubleKeyFrame KeyTime="00:00:00.5000000" Value="2.93"/>
</DoubleAnimationUsingKeyFrames>
<DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="grid1" Storyboard.TargetProperty="(UIElement.RenderTransform).(TransformGroup.Childr en)[3].(TranslateTransform.Y)">
<SplineDoubleKeyFrame KeyTime="00:00:00.5000000" Value="96.5"/>
</DoubleAnimationUsingKeyFrames>
</Storyboard>
</Window.Resources>
<Window.Triggers>
<EventTrigger RoutedEvent="FrameworkElement.Loaded">
<BeginStoryboard Storyboard="{StaticResource Storyboard1}"/>
</EventTrigger>
</Window.Triggers>
<Grid x:Name="LayoutRoot">
<StackPanel>
<Grid Height="100" Background="#FFF5FF00" x:Name="grid">
<Viewbox HorizontalAlignment="Left" Width="100">
<Button Content="Button"/>
</Viewbox>
</Grid>
<Grid Height="100" Background="#FF00B3FF" RenderTransformOrigin="0.5,0.5" x:Name="grid1">
<Grid.RenderTransform>
<TransformGroup>
<ScaleTransform ScaleX="1" ScaleY="1"/>
<SkewTransform AngleX="0" AngleY="0"/>
<RotateTransform Angle="0"/>
<TranslateTransform X="0" Y="0"/>
</TransformGroup>
</Grid.RenderTransform>
</Grid>
</StackPanel>
</Grid>
</Window>
:)
qasleuth
04-27 01:08 PM
Maybe you should combine his/her statement with body language. Did the IO raise the eyebrows, smirk, frown etc and word-smith the statement. Was it 'pre-adjudicated' (past tense) or 'will be pre-adjudicated' (future tense) or something else. 'pre-adjudicated under review', first half is contradicting the second half of the statement. 'Pre-adjudicated' could mean everything is clear and waiting for a visa number. 'Under review' could mean something else...additional review ?
Kidding apart, Your guess is as good as mine. Do not tie yourself up in knots. It is such a black box, you've been around these forums, nobody knows for sure, anybody can hazard a guess.
Kidding apart, Your guess is as good as mine. Do not tie yourself up in knots. It is such a black box, you've been around these forums, nobody knows for sure, anybody can hazard a guess.
kum31
10-01 09:53 PM
hi ,
Here is my situation.
(employer) -> (middle vendor ) -> prime vendor -> (End client ).
I am working to a client in california in the above mentioned order. After 1 year we got rid of middle vendor and prime vendor is working with my employer directly . Now middle vendor is threatning me that he can sue me for breaking the line of contract .
i dont understand ho can even its possible as i never signed any document with middle vendor and he is not even my employer . He is just acting as middle layer by showing prime vendor that i am his employee which is wrong. now we removed him from line of contract and he is saying that he will sue all of us for doing this.
is there any way that he can even do this ?
- Thanks in advance.
Here is my situation.
(employer) -> (middle vendor ) -> prime vendor -> (End client ).
I am working to a client in california in the above mentioned order. After 1 year we got rid of middle vendor and prime vendor is working with my employer directly . Now middle vendor is threatning me that he can sue me for breaking the line of contract .
i dont understand ho can even its possible as i never signed any document with middle vendor and he is not even my employer . He is just acting as middle layer by showing prime vendor that i am his employee which is wrong. now we removed him from line of contract and he is saying that he will sue all of us for doing this.
is there any way that he can even do this ?
- Thanks in advance.
Комментариев нет:
Отправить комментарий